Made from 50mm Webbing with a neoprene pad on the bottom where it will rest against the top of your feet.
The minimum width of these straps is 35cm however they are adjustable length to about 50cm (whilst still having 2 sections of 10cm of velcro securing them) You could extend them further but shortening the overlap may reduce the strength of the velcro.
A small Stainless steel D ring is sewn into a pocket on the straps to attach a leash to (paddle ski etc.) This D-ring can be stored in the pocket out of site if not required.
This strap is made to go across both feet as per most downwind/ surf skis rather than each individual foot. This strap may suit individual foot loops like on some waveskis etc. but is not designed for this.
You may need to modify it but at your own risk.
This is the strap only and does not contain any hardware to attach the strap to your foot plates/ ski.
There are no pre cut holes on these straps for the instertion of mounting hardware (bolts etc). This is because of the many different hole locations and sizes across various skis. We recommend using a hot metal tip (e.g. soldering iron etc) to melt the hole in the appropriate locations for your ski and hardware.
We are happy to “cut” the holes if you bring in the appropriate template, however all care taken no responsibility if they are in the wrong spot.
Be the first to review “Surge Ski Foot Strap (Velcro, Neoprene & Webbing)”